To improve your skills in using SCANeR studio.

SCANeR studio is a very complete software, containing many functions. To properly manage the configurations of your simulators or your HPC calculation, to create advanced or 3D Terrain scenarios, and finally, to optimally use the APIs, training sessions with our expert are necessary. It is not only a question of learning to use SCANeR studio, but also of acquiring all the knowledge around its functionalities in order to use it in the most optimal way possible and to obtain a good quality and reliability of your uses. In addition, you will also be in contact with our team and its expertise!

Below, you can find the training catalog for SCANeR studio. For more information, don’t hesitate to contact us via the form.

Here are the standard trainings we propose:

Depending on your request, we can propose you to come to our office in Boulogne-Billancourt (near Paris) to participate in our pre-programmed trainings or to organize an on-site training.



    Events in May 2022

    Monday Tuesday Wednesday Thursday Friday Saturday Sunday
    25 April 2022 26 April 2022 27 April 2022 28 April 2022 29 April 2022 30 April 2022 1 May 2022
    2 May 2022 3 May 2022 4 May 2022 5 May 2022 6 May 2022 7 May 2022 8 May 2022
    9 May 2022 10 May 2022 11 May 2022 12 May 2022 13 May 2022 14 May 2022 15 May 2022
    16 May 2022 17 May 2022 18 May 2022 19 May 2022 20 May 2022 21 May 2022 22 May 2022
    23 May 2022 24 May 2022 25 May 2022 26 May 2022 27 May 2022 28 May 2022 29 May 2022
    30 May 2022 31 May 2022 1 June 2022 2 June 2022 3 June 2022 4 June 2022 5 June 2022



    Based on the feedback of its customers, AVSimulation has extended its training offer and is now providing a standard set of training modules to cover the large range of applications of SCANeR™studio.
    This catalog lists all the available programs sorted by categories and modules.
    These training modules are oriented toward a good user experience through exercises and real world samples.
    Training options
    There are different ways to attend a training:
    – at AVSimulation office in Boulogne-Billancourt
    – online, at your office
    Regular training sessions will be organized as follows:
    – One computer and one SCANeR studio full license per trainee
    – Access to AVSimulation integration workshop for the practice sessions with SCANeR studio approved hardware
    – Opportunity to meet the SCANeR studio support and development team
    Training sessions will be arranged for 2 to 6 students.




    B1: essentials SCANeR studio (basic level, 2 days)

    • Understanding the SCANeR studio modular structure
    • Create and manage a configuration
    • Start and stop a simulation
    • Create a basic experience
    • Save, analyze and export data
    • Create a basic road network
    • Understanding vehicle modeling
    • How to find help


    I1: Standard simulation modules (intermediate level, 2 days)

    • Design a dashboard
    • Bookmark simulation time with time markers
    • Set up a radio communication with Intercom
    • Set the sound samples
    • Save screen content with the screen recorder
    • Manage cameras and cockpits

    I2: Advanced experiments (intermediate level, 2 days)

    • Tune the environment and initial conditions
    • Control autonomous vehicles and pedestrian’s behavior
    • React to events, script the simulation
    • Manage the traffic (traffic lights, swarm, sources & sinks)
    • Monitor the interactive vehicle (position on the road, relationship with other vehicles)
    • Manag infrastructure objects and physics collisions
    • Interact with the driver (display text and images, play sound, cabin acquisition)
    • Choose data to record for debriefing
    • Advanced scripting (tasks, Python)
    • Advices for experiment creation

    I3: Road networks (intermediate level, 2 days)

    • Create a road network (axis, profiles, lanes, intersections)
    • Add traffic signs, traffic lights and decoration objects
    • Edit altitude and banking
    • Generate a 3D terrain and a rolling surface
    • Convert a 3dsMax object using OSG exporter
    • Import Shapefile data
    • License needed: Academic Plus or more

    I4: SCANeR studio module development (intermediate level, 2 days)

    • Overview of all the existing API
    • Build and use the SDK samples
    • Understand SCANeR™studio messages
    • Develop a module using C++
    • Develop a module using Matlab/Simulink Communicate using
    the VEN protocol
    • Use Controlpad to spy messages
    • Prerequisite: C++ and/or Simulink software programming

    I5: Acquisition and instrument panel development (intermediate level, 2 days)

    • Understand UDPCabin protocol
    • Develop an acquisition module using LabVIEW
    • Configure HumanDriver acquisitions
    • Exchange SCANeR™studio messages
    • Develop an instrument panel module
    • Prerequisite: LabVIEW and software programming knowledge

    I6: Vehicle into SCANeR

    • Understanding the SCANeR vehicle
    • Modifying a vehicle model
    • Use a model in simulation
    • Save / Analyze vehicle data
    • Non-real time simulation
    • Configuration of simulations


    A1: ADAS (advanced level, 2 days)

    • Create and manage a sensor configuration
    • Start a simulation with sensor modules
    • Analyze sensors network messages
    • Develop a basic ADAS system
    • Prerequisite: software programming knowledge
    • License needed: sensors add-on

    A2: Headlight / AFS (advanced level, 2 days)

    • Understand SCANeR™studio headlight solution
    • Create and manage a headlight configuration
    • Configure the visual module for displaying headlight
    • Start a simulation with NightTestManager module
    • Know headlight requirements for 3D databases
    • Develop a basic AFS strategy
    • Prerequisite: software programming knowledge
    • Licenses needed: headlight

    A3: Vehicle dynamics (advanced level, 3 days)

    • CALLAS Modeling
    • Create your own CALLAS model
    • Analysis / post-processing tools
    • Validation
    • Configuration of the simulation
    • External dynamic models

    A4: HPC (advanced level, 2 days)

    • Create a template scenario in SCANeR™studio
    • Create a test plan with SCANeR™Explore
    • Generate multiple variations of the template scenario
    • Start a non-real time simulation
    • Launch SCANeR™Compute with different options
    • Launch a multi-session of SCANeR™Compute
    • Useful for: vehicle dynamics, ADAS development

    A5: Unreal development for SCANeR use

    • Unreal manipulation
    • Creating an Unreal project
    • Creating an Unreal plugin
    • Asset management (Terrain/Car/Object)

    A6: Visual display configuration (advanced level, 1 day)

    • Understand visual screens computation
    • Workshop: configure screens for a CDS
    • Workshop: configure a cylindrical screen
    • Understand blending issues
    • Prerequisite: trigonometry basic

    A7: Driver tracking applications (advanced level, 1 day)

    • Understand SCANeR™studio trackers solution
    • Configure an eye tracker and a head tracker system
    • React to tracker events during the simulation (object detection)
    • Analyse and export eye tracker raw data
    • Workshop: connect an eye tracker system to SCANeR™studio
    • Prerequisite: know how to use a tracker system
    • License needed: trac

    A8: Advanced applications (advanced level, 1 day EACH)

    • Develop a lane keeping system (steering wheel vibration when out of lane)
    • Improve haptic feedback (road surface edition and impacts on sound, steering wheel
    and motion)
    • Motion effects and motion cueing
    • Reduce transport delay to prevent simulator sickness



    We suggest the following scheduled 4 days sessions in our office in Paris:

    B1 + I2 4 days First week of each month
    B1 + I4 + A1 4 days Second week of each month
    B1 + I3 4 days Third week of each month


    • The sessions are not dedicated to a single costumer.
    • A session with too few attendees might be postponed.




    Attendees On-site Training Off-site Training
    1 to 2 1 200€* / day Contact us for a quotation
    3 to 6 1 500€* / day Contact us for a quotation


    * The training is done in AVSimulation premises in Boulogne or remotely.
    We can also propose Custom Training on demand: